CSA Metal Hose

CSA Metal Hose
Pipe Size NPT OAL Part Numbers Burst Pressure @ 70°F (PSIG) Min. Bend Radius Static Min. Bend Radius Dynamic Working Pressure (PSIG)
1/2 CSA-SB26A0050-XXXX 4301 1-1/2" 6" 150 @ 70° F
3/4 CSA-SB26A0075-XXXX 3168 2-1/4" 8" 150 @ 70° F
1 CSA-SB26A0100-XXXX 2285 2-3/4" 9" 150 @ 70° F
1-1/4 CSA-SB26A0125-XXXX 2125 3-1/2" 10-1/2" 150 @ 70° F
1-1/2 CSA-SB26A0150-XXXX 1887 4" 12" 150 @ 70° F
2 CSA-SB26A0200-XXXX 2064 5" 15" 150 @ 70° F
2-1/2 CSA-SB26A0250-XXXX 1548 8" 20" 150 @ 70° F
3 CSA-SB26A0300-XXXX 1264 9" 22" 150 @ 70° F
4 CSA-SB26A0400-XXXX 927 13" 27" 150 @ 70° F
CSA Metal Hose
Pipe Size NPT OAL Part Numbers Burst Pressure @ 70°F (PSIG) Min. Bend Radius Static Min. Bend Radius Dynamic Working Pressure (PSIG)
1/2 CSA-SB30A0050-XXXX 4301 1-1/2" 6" 150 @ 70° F
3/4 CSA-SB30A0075-XXXX 3168 2-1/4" 8" 150 @ 70° F
1 CSA-SB30A0100-XXXX 2285 2-3/4" 9" 150 @ 70° F
1-1/4 CSA-SB30A0125-XXXX 2125 3-1/2" 10-1/2" 150 @ 70° F
1-1/2 CSA-SB30A0150-XXXX 1887 4" 12" 150 @ 70° F
2 CSA-SB30A0200-XXXX 2064 5" 15" 150 @ 70° F
2-1/2 CSA-SB30A0250-XXXX 1548 8" 20" 150 @ 70° F
3 CSA-SB30A0300-XXXX 1264 9" 22" 150 @ 70° F
4 CSA-SB30A0400-XXXX 927 13" 27" 150 @ 70° F

CSA Metal Hose

EFP CSA rated flex connectors are designed for use as a connector in medium pressure natural gas applications in the United States and Canada. They are built to length and come with either carbon steel or stainless steel Sch40 male NPT ends or beveled weld ends.

Every assembly is pressure tested and is rated to 150 psig.

Safety factors range from 6:1 on the 4” diameter assemblies to greater than 28:1 on ó” diameter. All finished assemblies come with a metal tag permanently attached with manufacturer, manufacture date, maximum working pressure, maximum lateral offset, and CSA logo.